Sterile ThermaSat™ 60 Polyester Wipers, Pre-Wetted with 70% IPA / 30% DI Water STX4305

Sterile ThermaSat™ 60 Polyester Wipes, Pre-Wetted with 70% IPA / 30% DI Water 9” x 9” (23 cm x 23 cm) - STX4305

ThermaSeal™ 60 - 9” x 9” (23 cm x 23 cm) pre-wetted with 70% IPA / 30% WFI

ThermaSeal™ 60 is made from 100% polyester with a sealed edge, cleanroom laundered. Available dry (ThermaSeal™), pre-wetted (ThermaSat™), sterile and non-sterile.

Features & benefits

  • Constructed from 100% polyester creating a wiper ideal for spill control, cleaning, and solution application.
    • Designed for use on abrasive surfaces. This wiper will not easily snag or abrade releasing particles and fibers into the process or environment.
    • Excellent chemical resistance for compatibility with a variety of solutions.
    • Autoclave safe (dry wipers only!).
    • ThermaSeal™ and ThermaSat™ wipers are packaged in easyto-open bags (perforated bag, slider bag or peel and reseal bag).
    • ThermaSat™ products are prewet with 0.2 μm filtered 70% IPA / 30% DIW or 30% WFI for ease of use.
    • ThermaSat™ wipers provide consistent, optimized cleaning efficiency with repeatable wetness and VOC levels.
    • ThermaSat™ wipers are packaged in reclosable slider bags and peel-and-reseal bags reducing solution evaporation that preserves the consistent wiper wetness level.
    • For aseptic manufacturing inside RABS and isolators, ThermaSat™ wipers also come in an additional VHP barrier foil bag providing protection for the product during the VHP
    sanitizing process.
    • Meets USP <797> and USP <800> wiper requirements.

    • Individually lot coded for ease of traceability and quality control.

Part Number: STX4305

Product Specs

Inner Bags: 15 wipes / bag Outer Bags: 15 bags / case


• Wiping and cleaning surfaces, equipment and parts
• Applying and removing lubricants, adhesives, residues and other solutions including disinfectants.
• Cleaning with solvents such as isopropyl alcohol (IPA), ethanol, acetone, and degreasers.
• Cleaning gloves, notebooks, phones or any other item entering the cleanroom.
• Lining trays for holding, protecting, drying and storing of parts, equipment and devices.